Plan on getting a Zagg Invisibleshield for your iPad?
- Thread starter wot_fan
- Start date
TARDIS Tara
iPF Noob
I've installed two Zagg InvisibleShields on two iPads (screen only) and two Zagg InvisibleShields on two iPhones.
If you can find a mall kiosk to do this for you DO EET!
They're a pain to put on, but boy howdy, they wear like iron.
I wouldn't have a touch screen without some sort of protection on it. All it takes is one loose toddler with a Sharpie. Or a fork.
So much cheaper than a replacement screen.
If you can find a mall kiosk to do this for you DO EET!
They're a pain to put on, but boy howdy, they wear like iron.
I wouldn't have a touch screen without some sort of protection on it. All it takes is one loose toddler with a Sharpie. Or a fork.
So much cheaper than a replacement screen.
David Frisby
iPF Noob
I put mine on two days ago. It wasn't to hard and it is awesome! Watch the install video on YouTube first. Use lots of extra spray. Do the back first so you can get a little practice first! Use a towel to soak up the goop quickly. Don't get your iPad too wet. I bougt mine onamazon for $25 shipped and I wouldn't use the iPad without it. Looks awesome. The hardest park ist getting all the lent in the air to stay off the screen between the time you clean it with a blowdryer till you put the protector on... Almost need a clean room
Not enough spray
Make sure you have enough spray in your bottle before you begin!
I got only 3-4 sprays worth and the bottle was empty before the first side was even wet enough. Without enough spray on the tasky side when you place it down you cannot move it around at all!!
My bottle was practically empty when I opened my package but I didn't think anything about it being a first time user. I thought they just came with the bottom only 1/8 filled. With out enough spray on both sides of the protector you are out of luck! I'm returning my product to best buy in hopes to get another one with enough spray.
Make sure you have enough spray in your bottle before you begin!
I got only 3-4 sprays worth and the bottle was empty before the first side was even wet enough. Without enough spray on the tasky side when you place it down you cannot move it around at all!!
My bottle was practically empty when I opened my package but I didn't think anything about it being a first time user. I thought they just came with the bottom only 1/8 filled. With out enough spray on both sides of the protector you are out of luck! I'm returning my product to best buy in hopes to get another one with enough spray.
Purpleorchid
iPF Novice
How big was your bottle? I bought the front only kit and my spray bottle is ~1.5 inch in diameter x ~3 inches tall (vs the bottle of the iPhone/Touch versions which is ~0.5 inch in diameter x 4 inches tall). The iPad bottle was more than 3/4 full to begin with. I used way less than half of the liquid.
You only got 3 or 4 squirts of the spray liquid with your kit? Odd...
You only got 3 or 4 squirts of the spray liquid with your kit? Odd...
RTFM error! Please read the instructions more carefully!
It clearly is written in the instructions, that even IF there is not enough fluid in the bottle, just fill it up with plain water. The chemical inside will be enough for applying the product.
Nightmare to install
Hey guys,
Just thought that I would add in my two cents regarding the Zagg InvisibleShield (front). In short, installation was a nightmare. I spent over 45 minutes -- after having read the manual, watched a couple of YouTube instructional videos, and ensured that my entire working area was dust-free, clean, and ready -- trying to get the little piece of tacky film on my iPad. I sprayed my fingers, sprayed both sides of the protector film, and then proceeded to attempt to get the film on the screen. Despite being slippery, it stuck quickly and stretched unnaturally ("military-grade", my foot!), and after ten minutes of fiddling with trying to position and slide it properly, it folded in upon itself and became useless. I spent the rest of the time trying to get it unfolded and repositioned. After a frustrating session, I called it quits and tossed the film.
It's so unforgiving that I cannot honestly see how Zagg expects the typical consumer to install this themselves. I consider myself very dexterous (I'm a pianist, for example, and this finger-work was far more ridiculous than anything I have ever dealt with). I am considering having Best Buy or a Kiosk install the product, but I really have to know if you guys think it's worth it, or, if there's a screen for front protection that will do the trick without giving me a coronary.
Thoughts? Thanks!
Hey guys,
Just thought that I would add in my two cents regarding the Zagg InvisibleShield (front). In short, installation was a nightmare. I spent over 45 minutes -- after having read the manual, watched a couple of YouTube instructional videos, and ensured that my entire working area was dust-free, clean, and ready -- trying to get the little piece of tacky film on my iPad. I sprayed my fingers, sprayed both sides of the protector film, and then proceeded to attempt to get the film on the screen. Despite being slippery, it stuck quickly and stretched unnaturally ("military-grade", my foot!), and after ten minutes of fiddling with trying to position and slide it properly, it folded in upon itself and became useless. I spent the rest of the time trying to get it unfolded and repositioned. After a frustrating session, I called it quits and tossed the film.
It's so unforgiving that I cannot honestly see how Zagg expects the typical consumer to install this themselves. I consider myself very dexterous (I'm a pianist, for example, and this finger-work was far more ridiculous than anything I have ever dealt with). I am considering having Best Buy or a Kiosk install the product, but I really have to know if you guys think it's worth it, or, if there's a screen for front protection that will do the trick without giving me a coronary.
Thoughts? Thanks!
Purpleorchid
iPF Novice
Stretched unnaturally? You don't stretch the product to install it. You just lay it down on the device. Imagine a sheet of tissue paper soaked with liquid glue. You hold it up by two corners, and gently lower it down, align the two other corners onto the device, the gently let those two corners touch the device, then continue to lay/roll the film down along the screen.
If you notice it's misaligned or you accidentally got a big bubble forming, you pull it up the way you laid it down, and start over. With the liquid, there should not be any unnatural stretching to lift it up again.
Sorry you had trouble installing it.
If you notice it's misaligned or you accidentally got a big bubble forming, you pull it up the way you laid it down, and start over. With the liquid, there should not be any unnatural stretching to lift it up again.
Sorry you had trouble installing it.
motorman4566
iPF Noob
I have one on front and back had installed works great and won't scratch! Love products
Michael@GadgetInsight
iPF Noob
I have never been a fan of cases for my electronics. The iPad and iPhone are some of the greatest products out there because of the functionality they provide in such a thin and lightweight package. I don't like to bulk up the device with big cases. I figure I'll try out the zagg because it may just preserve the iPad in its original form and provide some additional protection.
Most reactions
-
452 -
360 -
219 -
215 -
132 -
112 -
59 -
29 -
11 -
4 -
K
1
Similar threads
