New to iPad - what's up with the limited capabilities

[EMR]

Hello fellow iPad users,

I recently purchased an iPad 2 as I am trying to become more mobile with my work. I have logged numerous amounts of hours reading forums and a variety of feedback, so I have become somewhat well versed in the happenings of what the iPad can and cannot do.

My question is I purchased a program called Print Central Pro, and I have gotten it to print to my printer; however, I am currently experiencing an issue where the printer only prints part of the first page and then goes back into ready mode as if the PCP stopped sending data to the printer. Has anyone else experienced such an issue, and if so, can you share some insight. My next post will be regarding file management, but until then, I hope I can get some great insight into my printing woes....

Thanks!

 

[Tim SPRACKLEN]

The easiest first way to try to solve ‘unexplained’ or ‘unusual’ problems with the iPad are:-

Force the offending app to close. If you have iOS 4.2 or 4.3 double-press the ‘Home’ button to bring up the multi-task bar at the bottom of the screen. Press *and hold* any icon until they start to ‘jiggle’. Then tap the top left-hand corner of the app that you want to close. It will ‘disappear’ from the list. Don’t panic - you’ve not deleted it, just closed it. Now tap the Home screen and the multi-task bar will disappear. Re-open the iPad’s app and see if the problem has resolved itself. If not, it’s on to possible solution number two!!
Restart the iPad. Press *and hold* the Power button. After a couple of seconds a slider control will appear asking you to confirm that you really want to switch the iPad off (this is all you’ll be doing). Slide the control to accept. A rotating white ‘bezel’ will appear in the iPad screen as the iPad powers down (it takes a few seconds, just like it would if you were shutting down your PC). When the screen of the iPad has gone completely blank, press *and hold* the Power button for a couple of seconds until the white Apple logo appears and the iPad starts to power up. This takes several seconds, so be patient. During the power up the automatic screen orientation function is disabled, so don’t panic. A few seconds before the power up is complete, the iPad plays a little ‘jingle’ and then you’re back to the Home screen. Restart the iPad’s app and see if the problem persists. Apple (and Forum members) recommend that you power down your iPad at least once a week, just as you might regularly completely switch off your PC. The normal procedure of just briefly pressing the Power button of the iPad merely puts it to ‘sleep’. Most Forum members have found that one of the two methods I’ve mentioned here cure a whole bunch of unexplained problems and are an easy first step to resolving most anything that happens on the iPad.

Tim
Scotland